What are Molten Salts?

What is Molten Salt? Molten Salt is a rather dreadful name for an otherwise useful catagory of materials & processes. The term "Molten Salt" is self-descriptive; it is melted salt(s). Another common name is Fused Salt(s). The simplest example of a molten salt would be to heat sodium chloride ("table salt") to a red heat (greater than 801° C, or 1474° F)1 upon which it would melt into a liquid. This liquid is stable, has a heat capacity similar to water (by volume) and flows much like water does. The major differences are the obvious higher temperatures attainable in the molten salt state and when the salt solidifies (freezes) it contracts versus expanding like water. Thus, molten salt freezing in a pipe would not burst the pipe as water would.

Salts are simple, usually ionic (that is the chemical bonds are asimple ionic type) and stable compounds. The most common example ofwhich is "table salt", or sodium chloride (NaCl). Both sodium andchlorine are notoriously reactive; sodium is one of the mostelectropositive substances (wants to lose an electron) & chlorineone of the most electronegative (wants to take an electron). Thesetwo opposite substances readily join to form stable sodium chloridevia a strong ionic bond. The melting point of sodium chloride is801° C ( 1474° F )2, at which point itbecomes a liquid, and thus a "molten salt".

 

Features of Molten Salts

 

Conducts Electricity

One of the interesting features of molten salts is their ability to conduct electricity. For example, solid sodium chloride (NaCl, or table salt) does not conduct electricity; it is an insulator. If NaCl is placed into water, the mutual attraction both sodium (Na) and chlorine (Cl) have for water molecules cause their bonds to break (dissolving) and form ions (charged atoms or molecules) within the water. These electrically charged ions can conduct electricity if there is a voltage potential (electric field).

To test this, place two electrodes in distilled water & using an ammeter, check to see if there is a current flow when a voltage is applied. There will be virtually no current flowing as water is a very poor conductor of electricity. Add a substance that will dissociate into ions (an "electrolyte"), such as table salt, and current will flow. Furthermore, this current will allow the transfer of ions (movement of ion charge 'packets') so that either the water will be dissociated into its component gases hydrogen and oxygen, or, depending upon the electrolyte, the some of the electrolyte (NaCl, in this case) may be dissociated instead, thereby releasing the gas chlorine; which is how most chlorine gas is produced (electricity is passed through concentrated salt water).

Molten salts conduct electricity the same way they do when they are dissolved in water; some of the salt molecules are dissociated into ions, which allows the ions to conduct electricity. The "Downs Cell" capitalizes on this conduction of electricity to produce virtually all of the metallic sodium required by industry. Electricity is run through molten sodium chloride (with a little calcium chloride salt added to lower the melting point of the sodium chloride). At one terminal chlorine gas is released (the anode) and at the other (the cathode) liquid sodium.

 

Using Electricity to Dissociate (Decompose) Chemicals

The principle of running electricity through molten salts has been around for quite some time. In fact, the first commercial application of electrolytic molten salt technology was the development of the Hall-Héroult electrolytic process for producing aluminum metal in 1886, but the British chemist Sir Humphry Davy had performed the basic experiment in 1809!3 So, as you can see, molten salt technology has been around for almost 200 years.

 

What is Molten Salt Technology?

 

Molten salt technology is a catch-all phrase that include somevery diverse technologies; electro-chemistry, heat transfer, chemicaloxidation/reduction baths, and nuclear reactors. All of thesetechnologies are linked by the general characteristics of moltensalts:

 

Molten Salt Heat Transfer - Solar Power Tower

Molten salts have been used in many industries as a hightemperature heat transfer medium. The 'highest profile' use of moltensalts in this regard is the Solar Power Tower near Dagget, California(excuse the pun). It uses a Sodium Nitrite/Nitrate mixture to absorband store the sun's heat from the focus of many mirrors in the desertupon a central tower. The heat from the salt is then transfered via aheat exchanger to produce steam to drive a conventional steam turbineand generator to produce electricity from the sun for SouthernCalifornia.3a

 

Molten Salt (Pyroprocessing) of Non-Ferrous Metals

Molten salts are also used to produce most non-ferrous metals(non-iron like metals; e.g., aluminum, titanium, etc.). The mostnotable and oldest use was the previously mentioned production ofaluminum via electrolytic decomposition of alumina (aluminum oxide;Al2O3). A non-electrical method of using moltensalts to produce metals is used to produce titanium. Titanium oxidefrom various ores is reacted with chlorine and carbon (usually in theform of petroleum coke) to form titanium tetrachloride(TiCl4), which is a salt of titanium. This salt is meltedand boiled off so as to distill and purify the TiCl4. Itcan then be contacted with sodium (produced via the previouslymentioned molten salt Down's Cell) or magnesium metal in the Hunteror Kroll process (respectively) to produce titanium sponge and sodiumchloride (NaCl) or magnesium chloride (MgCl2). Thetitanium sponge is a raw material in the fabrication of finishedtitanium metal products.

 

Molten Salt Salt Electrolytics - Fuel Cells

Molten salts are also used in Fuel Cells. While there are manydifferent type currently being researched, the usual characteristicsis to employ a mixture of various salt carbonates (e.g.,Na2CO3, sodium carbonate & other carbonatesof lithium, potassium, etc.) as the electrolyte of a battery called afuel cell. The advantage of this type of fuel cell is its ability touse carbon containing fuels (methanol, gasoline, etc.) directly inthe production of electricity. The disadvantage is these molten saltscorrode metal very easily. Lifetimes of the electrodes is still aproblem area.

Molten salts are currently used commercially to strip metal cleanof impurities. This simple process utilizes the high temperature andcatalytic and oxidative properties of Sodium Nitrite/Nitrate(NaNO2/NaNO3) salts. For example, Whirlpool(the appliance manufacturer) uses a molten salt bath of sodiumnitrite/nitrate salts to clean the paint off of its appliances thatfailed quality control checks. The molten salt completely cleans themetal of all paints by thermally decomposing and oxidizing the paintinto carbon dioxide (CO2) & water (H2O)vapors. The stripped metal appliance can then be repainted.

 

Molten Salt Oxidation (MSO) - Coal Gasification

Molten salts have also been studied since the early 1900s to gasify coal in a process called Molten Salt Oxidation (MSO). The molten salt used is usually sodium carbonate heated above its melting point of 851° C ( 1564° F) to around 900° - 1000° C. At this temperature the red hot salt functions as a catalyst, fluid reacting bed, and heat transfer medium; all in one! The coal is flash pyrolyzed such that no tars or oils are produced. Steam is usually injected too so that the combination of coal's thermally decomposed higher organic molecules along with catalytically assisted carbon-steam reactions (i.e., C + H2O = CO + H2) produces mainly carbon monoxide (CO) and hydrogen (H2) gases at atmospheric pressures. At higher pressures, there will be significant methane (CH4) and higher hydrocarbons produced. Carbon monoxide (CO) and hydrogen (H2) can be used directly as a fuel gas or as a synthesis gas to produce virtually any organic material. The most common use of synthesis gas however, is to produce Methanol (methyl alcohol - CH3OH) which can also be used as a fuel, and is used in race cars, but is usually a raw material for the production of various organics (octane boosters, gasoline additives, plastics, chemicals, and drugs). Given the renewed interest in the so called "Hydrogen Economy", whereby hydrogen is used as a "carrier fuel" to provide energy portability and transmission, it is likely MSO will play a significant role in the production of hydrogen fuel for the Hydrogen Economy via the "water shift" reaction where the Synthesis gas (the mixture of CO and H2 gases decribed above) is converted into nearly pure H2 gas by the following, catylized reaction:

CO + H2O = CO2 + H2

The CO2 can then be fairly easily removed via various reactions, as it is a mild acidic gas which can be combined with various alkaline substances [e.g., CaCO3 (s) + H2O + CO2 = Ca(H2CO3)2 (aq)]. Generally, the more alkaline the substance the faster and more complete the reaction (absorbtion) of the CO2. Thus, sodium hydroxide (i.e., "Drano", or Lye - NaOH) would work much better at absorbing the carbon dioxide. Another method to remove the CO2 from the H2 gas is via liquification (using pressure and lower temperatures) of the carbon dioxide gas which liquifies much easier than the hydrogen gas. The liquified CO2 could then be resold for various industrial or food processes.

Molten salt gasification of coal has also been proposed forwastes, to include garbage (MunicipalSolid Wastes - MSW). 

 

Molten Salt Oxidation (MSO) - Chemical Weapons

In the mid-1950s Rockwell, Inc. conducted extensive tests ofmolten salts for the purpose of destroying chemical weapons. This wasalso called Molten Salt Oxidation (MSO --> good description atLawrence Livermore National Lab's Upadhye'sMSO description), and was a spin-off of the earlier coalgasification studies. Similar to the advantages of using moltensodium carbonate to gasify coal, MSO has the additional advantage ofhaving large amounts of sodium in close proximity to the decomposingchemical weapons molecules. This is significant because chemicalweapons usually contain large amounts of fluorine, sulfur and/orchlorine, all of which can form radicals which may cause theproduction of carcinogens such as dioxins. The long residence timesof the chemical weapons in a molten salt bath, as compared toincineration, combined with the presence of large amounts of sodiumallows the chlorine, sulfur, and fluorine radicals plenty of time toform stable, and safe, sodium compounds such as sodium sulfate (alaundry soap and food additive), sodium chloride (table salt), andsodium fluoride (an anti-cavity toothpaste ingredient). Althoughthere were no significant technical obstacles to employing MSO forchemical weapons' destruction, widespread Molten Salt ignorance andinertia prevented its deployment.

 

Molten Salt Reactors (MSRs) - a type of Nuclear Reactor

The most interesting application of molten salt technology was thedevelopment of the Molten Salt (Nuclear) Reactor (MSR). Originallydeveloped to power a deep penetration bomber for targets in theSoviet Union during the early Cold War (1946 - 1962)4,it is a remarkable, yet virtually unknown reactor. Part of theproblem was the limited geographical experience of the MSR as bothoperating MSRs were built only at Oak Ridge National Laboratory(ORNL), near Knoxville, Tennessee, USA.

The first MSR was the 1954, 100-hour operation of the AircraftReactor Experiment (ARE) at ORNL5. Its sole purposewas to demonstate the then unheard of notion of operating a reactorat red heat (~750° C; ~1,550° F) with a molten fuel andcoolant consisting of melted fluoride salts (sodium fluoride, NaF;zirconium fluoride, ZrF 4; and UF4[enriched in 235U])6. The secondMSR was a civilian power plant prototype, the Molten Salt ReactorExperiment (MSRE)7. Hugely successful, it wasignored by the US Atomic Energy Commission (US AEC), which haddecided to favor the Liquid Metal Fast Breeder Reactor (LMFBR). TheDirector of ORNL, Dr. Alvin Weinberg, pushed for the MSR, but wasfired for his efforts 8.

The notable features of this reactor are:

 

 

References

 

1. Page B-137, CRC Handbook of Chemistry andPhysics, 53rd Ed.

2. Ibid.

3. BritannicaCD 97 search for "aluminum" AND "Davy".

3a. For more information on the use of molten saltfor heat transfer and storage visit SandiaNational Laboratory's web site at:(http://www.sandia.gov/Renewable_Energy/solarthermal/NSTTF/salt.htm)

4. Pages 15 - 20, subject listing "Aircraft NuclearPropulsion (ANP) Program", in book, "THE ATOMIC ENERGYDESKBOOK", John F. Hogerton (1963).

5. R.C. Briant et al., Nuclear Science andEngineering, Vol. 2, No. 6, 795 - 853 (1957).

6. Page 677 of book, Fluid Fuel Reactors,James A. Lane, H.G. MacPherson, & Frank Maslan (1958).

7. Pages 377 - 378, "The Molten Salt Adventure", byH.G. MacPherson, NUCLEAR SCIENCE AND ENGINEERING, Vol. 90, pgs374-380 (1985).

8. Pages 198 - 200, "TheFirst Nuclear Era : The Life and Times of a Technological Fixer",by Alvin Martin Weinberg (1994).

 

 

Copyright © Bruce Hoglund, 1997


This was written and created by BruceHoglund, © 1997

Please send me any HELPFUL comments. Responsible use is allowed aslong as the author is cited.

Last modified, 26 Feb 2007